Props

Adjustable Props

Are Manufactured from high quality material with painted finish for long life and are highly resistant to site wear and tear. Can be used on all types of building construction or for any type of use where an adjustable load bearing member is recurred. The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustment. The cost collar located below the gives fine adjustment for leaving or striking.

The roiled thread ensures no loss of material or strength at this critical point.

Medium Duty Prop
Code Screw Threaded Tube L/O D/T (mm) Outer Tube L/O D/T (mm) Inner Tube L/O D/T (mm) Height of USE
M/n. Max.
KIC. 201 220/60.3/3.2 1500/60.3/2.0 1500/48.3/2.0 1750 2650
KIC. 102 220/60.3/3.2 1500/60.3/3.2 1500/60.3/2.0 2000 3150
KIC. 103 220/60.3/3.2 1500/60.3/2.0 2500/48.3/2.0 2500 3650
KIC. 104 220/60.3/3.2 1500/60.3/2.0 3000/48.3/2.0 3000 4150
KIC. 105 220/60.3/3.2 2000/60.3/2.0 3000/48.3/2.0 3000 4650
Heavy Duty Prop
Code Screw Threaded Tube L/O D/T (mm) Outer Tube L/O D/T (mm) Inner Tube L/O D/T (mm) Height of USE (mm)
M/n. Max.
KIC. 201 220/60.3/3.2 1500/60.3/3.1 1500/48.3/3.1 1750 2650
KIC. 202 220/60.3/3.2 1500/60.3/3.1 2000/48.3/3.1 2000 3150
KIC. 203 220/60.3/3.2 1500/60.3/3.1 2500/48.3/3.1 2500 3650
KIC. 204 220/60.3/3.2 1500/60.3/3.1 3000/48.3/3.1 3000 4150
KIC. 205 220/60.3/3.2 2000/60.3/3.1 3000/48.3/3.1 3000 4650
Note
  1. L= Length of the Element.
  2. O.D.= Outer Diameter
  3. T= Wall Thickness

Props must be braced in both direction by tubes and fixed couplers at approximately 250mm above Prop nut when extended beyond 3.6M or in near measure with same strength and load carrying capacity. Steel tubes used for inner and outer of Props are continuous welded and conforms to IS: 1998 or 1161, Grade YST 210.

Propex

Propex Mini Prop & High Quality are manufactured from high quality material. IS 1161 standard with paint finished for long life and are highly resistant to site wear and tear.

Can be used on all type of ETP Plant Tank foundation, where adjustable load bearing member is recurred.

Code Height of USE (mm)
M/n. Max.
KIC. 401 600 mm 900 mm
KIC. 402 900 mm 1200 mm

Push - Pull - Props

A high quality adjustable prop. Complete with swivel head and pre-drilled anchor base plate.

Code Closed Open
KIC. 301 1.14m 1.83m
KIC. 302 1.85m 3.12m
KIC. 303 2.08m 3.35m
KIC. 304 2.69m 3.96m
KIC. 305 3.30m 4.88m